Cat 120K 140H 140K 160H Motor Grader Caterpilar with Low Price
Main parameters:
- Leveraging Caterpilar designing and experience on MG tandem axle
- Improved bearing Layout and optimized load distribution with 4 planetary gears final drive
- Less down time and reduced labor and service cost for maintenance and repairing
- Longer service interval for lubrication oil change
- Leading in class manufacturing and quality control level, mandatory performance testing before delivering to MG assembly line
Control System
- 7 position link bar with electric over hydraulic control allows ease of operation from within the cab
- Optimum blade reach capability, quick DCM re-positioning for greater reach for better working on high bank side slope
- The link bar is essential for extending reach capability when cutting a bank slope or back slope of a ditch
- Replaceable bushings reduce service time and cost
Blade Float
- Standard blade float function allows blade to lower without hydraulic pressure for increased versatility
- Blade float is engaged by pushing the left and right lift cylinder controls all the way forward past the detent
- Provides protection for machine and pavement during snow removal and snow plowing
Hydraulic System
- Proportional Priority Pressure Compensating (PPPC) Valves contain specifically cut spools for motor grader applications, continuously matching of hydraulic flow and pressure to power demands, allowing ease of multi-function control for optimizing working efficiency
- World-class variable displacement piston pump, efficiently reduces power consumption and hydraulic system heat, improving fuel efficiency
- Load-sensing hydraulic system provides consistent and precise blade movement, improving finishing performance
- Inboard lock check valves within PPPC, prevents inadvertent cylinder movement and potential leaks
Drawbar
- A-frame tubular design drawbar provides maximum strength and durability
- Replaceable drawbar draft ball (bolted - not welded) for less service time and cost
- Easy removal of wear shims to adjust drawbar
Front Frame
- Flanged box section design removes welds from high stress areas, improving reliability and durability
- Continuous top and bottom plate construction provides consistency and strength, improving front frame durability
- Hydraulic hose routing minimizes exposure to damage and provides quick access for service
- Maintenance-free bushings improve durability and reduce overall service cost
Control Layout
- Short throw levers are efficiently spaced, allowing ease of multi-function control
- Short lever travel (40mm) with low lever effort reduces operator fatigue
- Large Cab
- High performance dashboard with 3 levels alarming monition system
- Cab mounted on the front frame provides exceptional view to blade and front axle even during articulation
- Large cab with 1.9m height and 30% larger space than most competitors, provides exceptional comfort
-
Specifications:
| Base Power (1st Gear) - Net |
128.0 kW |
| Engine Model |
Cat C7 ACERT |
| Displacement |
7.2 l |
| Bore |
105.0 mm |
| Stroke |
127.0 mm |
| High - Ambient Capability |
50.0 °C |
| Base Power - Net |
128.0 kW |
| Derating Altitude |
3048.0 m |
| High Ambient - Fan Speed - Maximum |
1560.0 r/min |
| Maximum Torque |
996.0 N·m |
| Note (1) |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. |
| Note (2) |
Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (3) |
Maximum torque measured at 1,000 rpm in gears 4-8. |
| Number of Cylinders |
6 |
| Speed at Rated Power |
2000.0 r/min |
| Torque Rise |
46% |
| VHP Range - Net |
128-143 kW (171-191 hp) |
MOLDBOARD
| Blade Width |
3.7 m |
| Arc Radius |
413.0 mm |
| Throat Clearance |
120.0 mm |
| Cutting Edge Thickness |
16.0 mm |
| Cutting Edge Width |
152.0 mm |
| End Bit - Thickness |
16.0 mm |
| End Bit - Width |
152.0 mm |
| Moldboard - Height |
610.0 mm |
| Moldboard - Thickness |
22.0 mm |
BLADE RANGE
| Blade Tip Range - Backward |
5° |
| Blade Tip Range - Forward |
40° |
| Circle Centershift - Left |
752.0 mm |
| Circle Centershift - Right |
728.0 mm |
| Maximum Depth of Cut |
735.0 mm |
| Maximum Lift Above Ground |
480.0 mm |
| Maximum Shoulder Reach Outside of Tires - Left |
1896.0 mm |
| Maximum Shoulder Reach Outside of Tires - Right |
1978.0 mm |
| Moldboard Sideshift - Left |
512.0 mm |
| Moldboard Sideshift - Right |
663.0 mm |
FRAME
| Circle - Outer Diameter |
1530.0 mm |
| Front Axle - Total Oscillation per Side |
32° |
| Front Axle - Wheel Lean - Left/Right |
18° |
WEIGHTS
| Gross Vehicle Weight - Typically Equipped |
17271.0 kg |
| Gross Vehicle Weight - Base - Front Axle |
4259.0 kg |
| Gross Vehicle Weight - Base - Rear Axle |
10491.0 kg |
| Gross Vehicle Weight - Base - Total |
14750.0 kg |
| Gross Vehicle Weight - Typically Equipped - Front Axle |
4936.0 kg |
| Gross Vehicle Weight - Typically Equipped - Rear Axle |
12335.0 kg |
| Gross Vehicle Weight - Typically Equipped - Total |
17271.0 kg |
| Operating Weight - Maximum - Front Axle |
8005.0 kg |
| Operating Weight - Maximum - Rear Axle |
14865.0 kg |
| Operating Weight - Maximum - Total |
22870.0 kg |
| Note (1) |
Base weight calculated on standard machine configuration with 14.00-24 12PR (G-2) tires, SP Rims, full fuel tank, coolant, lubricants and 90 kg (198 lb) operator. |
| Note (2) |
Typical operating weight calculated on standard machine configuration with HVAC ROPS Cab, 14.00-24 12PR (G-2) tires, MP rims, ripper, push plate, transmission guard, full fuel tank, coolant, lubricants and 90 kg (198 lb) operator. |
Photos:
1.. Which countries do we export to?
Asia: Philippine,Vietnam, India, Indonesia, Pakistan, Kazakhstan, Uzbekistan, etc.
Europe: Russia, Belarus, Ukraine, Lithuania, Saudi Arabia, etc.
South America: Brazil, Chile, Paraguay, Argentina, etc.
Africa: South Africa, Ethiopia, Libya, Ghana,Algeria,etc.
2.What are our advantages compared with other manufacturers/factories?
1)Reliable Quality: Carefully select regular manufacturers for supporting spare parts,like engines,bridge,transmissions,and many parts designed and produced by ourselves,
always adapting the best materials.
2)Competitive Price: Concentration of mechanized production in large quantities reduce
production cost to ensure that our price is competitive.
3)Service Team: First, our sales managers are online 24 hours,ready to answer your
questions at any time. Second, professional maintenance team with senior technicians,
ready to provide support services to users and dealers. Most problems can be solved
within 24 hours.
4)Fast Delivery:Under normal circumstances,we can delivery with 10 working days in
factory after receiving pre-payment.
3.Which payment terms can we accept?
Normally we can work on T/T or L/C.
1)On T/T term, 30% payment is required in advance for production, 70% balance shall
be paid before delivery or against the copy of original B/L for old long cooperation clients.
2)On L/C term, 100% irrevocable L/C at sight without "soft clauses" can be accepted.
4. How long is the validity of our quotation?
As a reliable supplier, basically our price remains stable through one year, we only adjust
our price based on two situations:
1)The rate of USD
2)TheThe price of material
Other questions, please contact me directly!!
Peter 008615921244786
Audited Supplier 
){kind=link}
){kind=link}